The Snelflight Hoverfly is a superb miniature helicopter that flies straight from the box. Its 12in rotor and ingenious Electrocyclic control provide the full cyclic, yaw and collective functions of larger 30 and 60 size outdoor models. Hovering, nose-in flying, circuits, take-off and safe landing: you can fly round the kitchen table if you wish. Under it, too! Hoverfly’s advanced electronics allow a gentle learning curve, while its precision is a treat for expert pilots. Graduating from fixed-wing to helicopter flying used to be hazardous. Hoverfly changes all that. It’s an ideal training craft, yet fun in its own right. At home, in the office, anywhere, the Hoverfly is simply amazing.
 

HOV301CF Hoverfly Ready-to-Fly with flightpad controller - £199.99

Based on the extremely popular Concept 30 SR-T, the Nexus shares 50% of its parts with it. Further refinements include a newly designed engine/clutch set-up with a direct top-start cone and low slung 240cc fuel tank under the shaft to improve the balance of the machine. The head assembly has been modified with an under-slung flybar and convenient main rotor head button. The main frames have also been re-designed to a modular layout that gives unparalleled access to the engine. In fact, the complete power train can be removed from the helicopter without removing the muffler or needle valve. Designed with a greater ground clearance and integral boom supports, the Nexus has even greater crash resistance when learning. This, together with its long main rotor shaft, gives the Nexus greater protection against boom strikes in the event of a heavy landing. Featuring SR-X style servo frames for the most direct linkage layout with a minimum of flex to give superb agility and precision and a repositioned gyro mount that moves it closer to the main shaft. An autorotation unit is fitted as standard and the Nexus also includes a two shoe clutch assembly and special adjustable silencer. The cooling duct is relocated for greater airflow over the engine.The Nexus features a stylish moulded body shell and decal set.

An easy to assemble and maintain 30 sized helicopter that is gentle and forgiving for the beginner. With built in design capabilities and ample engine power the experienced pilot can be assured of real performance and exciting flight times!
 

The Concept 32VR is a high performance helicopter designed for .32~.38 sized engines and is ideally suited to the demands of intermediate to experienced fliers. The 32VR was developed from the excellent 3D Concept 30SR-X. The Concept 32VR can perform powerful and dynamic manoeuvres from F3C rules to 3D aerobatics. The flapping head ideally combines in-flight stability with flexibility in aerobatics. Rotor blades and stabiliser paddles rotate in the same plane. The push/pull linkage system increases precision for the best cyclic response. The engine is mounted at an angle and the 32VR will accept a wide variety of engines. The strengthened main frame and revised gear ratio combine to give the highest power output. The main control linkage is a push/pull system. The tail rotor has a highly geared system for sharp and accurate control.

K21812 Concept 32VR - £249.99